NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it. Learn more

I understand

-Of course, we can supply the spare parts for all instruments produced by LogicaH&S, from the single screw to the most upgraded electronic board. As for boards, we can also supply customers with our technical assistance which is able to repair (and not only to replace!) electronic boards: in this way we can guarantee very low assistance costs (often assistance is free!). In case of emergency, we can supply, in accordance with customers, a replacing board (a new or restored one) while the customer sends us back the damaged one, to assure a very short interruption of machine working in all over the world.

 


Electrodes holder

Porta elettrodi ad infissione manualeLightweight and compact size electrodes holder (Ø45X16mm), POM made, with two stainless steel electrodes (length 15mm) that can be used manually to detect moisture in soft materials, like paper tubes or something similar. It is provided with silicone insulated cable and Banana plugs.

CODE: C001955 - Electrodes holder with two steel electrodes, insulated silicone cable, banana plugs - Cable length = 5m *
CODE: C001954 - Electrodes holder with two steel electrodes, insulated silicone cable, banana plugs - Cable length = 10m *

* Other cable lengths available on request.

  

 

Spare parts for electrodes holder

ElettrodiAISI304 stainless steel elettrodes, point 15x2,5mm and M6 thread, suitable with Electrodes holder

CODE: C002040

* Sold in packs of 10

 

 

 

 

 

 


Electrodes for moisture testing

Elettrodi con foroSeries of AISI303 stainless steel electrodes provided with Ø 4 mm hole for banana plugs, suitable for timber moisture testing.
For a long-time duration, we suggest to make a driving hole of a diameter slightly smaller than the electrode's (4 mm) to make its placement easy. (The driving hole must be made with low rotations drill, to prevent wood from heating).


Lenght 15 mm * - CODE: C000009
Lenght 25 mm * - CODE: C000010
Lenght 40 mm * - CODE: C000011

Sold in packs of 20

 

 

  

 

Electrodes for moisture testing

Elettrodi filettatiSeries of AISI304 stainless steel electrodes provided with a Ø 4 mm hole for banana plugs, suitable for timber moisture testing.
This electrodes can be easily placed/removed using a standard screwdriver thanks to its threaded tip.


Lenght 15 mm * - CODE: C001484
Lenght 25 mm * - CODE: C001485
Lenght 40 mm * - CODE: C001486

Sold in packs of 20

 

 

 

 

 

Banana plugs

Spinotti a bananaConnectors made of AISI304 stainless steel, Ø 4 mm, with rubber insulation, suitable for high temperature into the kiln. They can be supplied as spare parts for timber probe cables.


CODE: C001483

 

 

 

Cellulose plates

Placche cellulosaCellulose plates for the equilibrium moisture measurement inside the chamber. They correspond exactly to the calibrations required by our controllers.
WARNING: the characteristics of cellulose are different for every producer; it is strongly recommended to use original spare parts only.

Pack 50 pcs - CODE: C000498
Pack 100 pcs - CODE: C000499

 

 

  

 

High performance cellulose plates

Cellulose ad alte prestazioni

Cellulose plates for the equilibrium moisture measurement inside the chamber. They correspond exactly to the calibrations required by Logica controllers. Compared to the traditional version, these plates offer an improved sensitivity to low EMC values and an higher reliability, thanks to the printed contact strips.
WARNING: the characteristics of cellulose are compatible with Delphi and dTOUCH control systems only; for the less recent Delphi (version < 5.1) a firmware upgrade is recommended.

Pack 50 pcs - CODE: C001587
Pack 100 pcs - CODE: C001588

 

   

Probe panels

Pannello porta sondeTo guarantee controller's good working, probe panels and cables inside the kiln must always be in perfect state: dust or damage can affect electrical insulation and may cause wrong readings.
As spare parts, we can also supply panels provided with temperature probe (NTC) and cellulose clamp, with 3 or 6 connectors for probe cables or with direct output of 2 or 4 probe cables.
Panels are provided with high insulation cable (Teflon®) to be connected with the amplifier (available length: from 5 to 30m—multiple of 5m).

 

 

 

 

 

 

 

Probe cables

Cavi per sonde legnoLike probe panels, cables for timber probes must always work in perfect conditions.

Damaged or deteriorated cables cannot be repaired (a normal insulator cannot guarantee a good insulation) and must be immediately replaced. We can supply silicon or Teflon® insulated cables, shielded or unshielded, with single or double banana plugs termination.

Length from 5 to 30m (multiple of 5m)

 

 

  

 

Aluminum probes box for conventional cycles

Box AlluminoIs now available on request, a new line of resistant aluminum probes box, with special PTFE parts to ensure an optimum electrical insulation.

These new products have been designed by LogicaH&S to be long lasting, and be employed in conventional cycles.

 

 

 

 

 

Aluminum probes box for HT (heat treatment) cycles

Box Alluminio HTIs now available on request, a new line of resistant aluminum probes box, with special PTFE parts to ensure an optimum electrical insulation.
These new products have been designed by LogicaH&S to be long lasting, and be employed in HT (heat treatment) cycles. 

 

 

 

 

 

 

Compact plate for probes box mounting

Piastra compatta per fissaggio BoxCompact plate made of stainless steel for fixing the probes box to the wall. It is a compact model that can be used in alterative to the traditional ones, that are more prominent due the overhead guard.

CODE: C001668

 

FaLang translation system by Faboba